Possible Cause
- Extension cord not connected to the plug
- Cord not connected to power source
- Switch not in “ON” position
Possible Solution
- Check extension cord is fully connected to blower
- Check extension cord is fully connected to a receptacle
- Check that switch is in the “ON” position
Problem
-
Unit does not run
TROUBLESHOOTING
If you drop the unit, carefully inspect it for damage. If the
housing is cracked or handles broken or if you see any
other condition that may affect the unit’s operation, contact
your local Authorized Service Center for repairs before
putting it back into use.
CAUTION:
Do not at any time let brake fluids, gasoline,
petroleum based products, penetrating oils, etc., come in
contact with plastic parts. They contain chemicals that can
damage, weaken or destroy plastic.
IMPORTANT
: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment should
be performed by a qualified service organization, always
using identical replacement parts.
CAUTION:
DO NOT POUR OR SPRAY WATER ON THE
BLOWER TO CLEAN. Never let any liquid get inside the
blower. Never immerse any part of the blower into a liquid.
WARNING:
For your safety, turn switch “OFF” and remove
extension cord plug from power source before maintaining
your blower. Failure
to
comply
with
this
warning
can
result
in
personal
injury
.
Fertilizers and other garden chemicals contain agents
which greatly accelerate the corrosion of metals Do not
store the tool on or adjacent to fertilizers or chemicals.
Make sure the blower is unplugged, then use only mild
soap and a damp cloth to clean the tool. Never let any
liquid get inside the tool; never immerse any part of the
tool into a liquid.
MAINTENANCE
5
Call us first with questions about operating or maintaining your blower
at 1-800-618-7474 between 8:00 a.m. – 5:00 p.m. Eastern
Standard Time, or get assistance on scotts.americanlawnmower.com.
CALL US FIRST !!
Model
BLR20085S
