18
Radio operation
Radio operation
All radio functions can be operated by the remote-you shouldn't need to
lower the front panel flap.
Tuning-in a new radio station
Pressing
BAND
selects radio operation. The display indicates the tuning
frequency, and just to the right of it, the band:
FM,
or
AM.
Repeatedly pressing
BAND
changes the band.
Having selected the required band, tune-in to a radio station in either of the
following ways:
To
search up or down the band for a station,
hold in
+
or
-
for 2
seconds then release.
To
change frequency one step at a time,
repeatedly press and
release
+
or
- .
You can keep any new station you've tuned-in by
storing
it in the memory
(see below).
Storing radio stations in memory
You can store up to 20 radio stations on each band.
1. Tune-in to the station you wish to store (as described above).
2. Decide on the memory number you will use for this station, for
example 2.
Note-For best FM reception, position the trailing FM antenna wire for
least interference. (Note if AM reception is poor, you may need to
rotate the unit.)
