38 of 116
A1 A2 A3 A4 is the factory default setting for
the common Alarm relay. It indicates if the
Alarm level is reached on any channel (1-4),
then the common alarm
relay will activate. The “ ” indicates an “OR”
logic. Like the warn relay, the alarm relay can
be configured to activate off any channel and
with AND/OR logic. See the programming
examples in the Appendix.
Press the ENTER button.
Press the ESCAPE button.
Press the UP button.
This programming mode will be passed at this
time.
If a REMOTE RELAY ASS’Y has been
provided with the Receiver/Controller. Refer
to Optional Remote Relay.
Press the UP button.
Press the ENTER button.
Press the UP or DOWN buttons to select the
correct time. Press the ENTER button.
Press the UP button.
Press the ENTER button.
RELAY: CMN ALARM
0 % LEL
0 % LEL
0 % LEL
28
SET LOCAL RELAYS
0 % LEL
0 % LEL
0 % LEL
29
SET REMOTE RELAY
0 % LEL
0 % LEL
0 % LEL
30
TIME: 14.45
0 % LEL
0 % LEL
0 % LEL
31
TIME: 14:46
0 % LEL
0 % LEL
0 % LEL
32
TIME: 14:47
0 % LEL
0 % LEL
0 % LEL
33
DATE: 7/3/2001
0 % LEL
0 % LEL
0 % LEL
34
DATE: 7/3/2001
0 % LEL
0 % LEL
0 % LEL
35
Summary of Contents for QuadScan II 7400
Page 10: ...5 of 116 Quick Start Programming Menu Tree...
Page 20: ...15 of 116 Figure 5 Mounting Dimensions of Model 7400...
Page 24: ...19 of 116 Figure 9 Battery Backup P N 096 0719 Outline Interconnection Wiring...
Page 60: ...55 of 116 Figure 13 Interconnect Wiring Between 7400 Remote Relay Assembly...