background image

REPEAT playback

Listen to iPod

Install the iPod universal dock adapter

1. Select the iPod universal dock adaptor fitting to your iPod 

    model, from the next table. The adapter No is marked at 

    the back of the adapter. 

2. Install the adapter with two tabs facing the front, by pushing 

    it down in the universal dock at the main unit top.

3. To remove the adapter, press at the back of the adapter and pull it up.

1.  With correct iPod universal dock adapter installed, gently dock the iPod 

     (without the protective cover) into the unit universal dock. 

2.  When docked, Internal iPod battery will be charged until it is fully charged.

3.  In ON mode, press SOURCE button to select “IPOD”.

     You can use the remote control to control iPod functions:

4.  Press MENU/ MEMO button on the remote control to iPod 

     access the iPod menu. 

5.  Press       /      button to select a function. 

6.  Press 

ENTER

 button to confirm the function. 

7.  You can press 

MENU/ MEMO

 button to return to previous menu.  

8.  When a song is selected, press       button to playback the music. 

9.  During playback, press        /        to select next or previous song. You can also press 

     MENU/ MEMO

 button to display the menu to select other functions.

10.Alternately, you can control your iPod directly for playback.

Note: 1. Only the universal dock adapter Nos. 1 to 7 are supplied with this unit.     

          Adapter Nos 8 to 11 should be supplied with your iPod model and they can be used 

          with this universal dock.

         2. Ensure that you use the universal dock adapter corresponding  to your iPod in order 

          to ensure that it is installed in a stable way and that the electrical contact is good

GB-10

PLAYING  iPod AND CHARGING INTERNAL iPod BATTERY

 

Universal

dock adapter

No

10GB,15GB,20GB

30GB & 40GB

4GB & 6GB

20GB

40GB

20GB & 30GB

20GB

40GB &60GB

60GB

2GB & 4GB

30GB

60GB 80GB

2GB,4GB,8GB

iPod description

Capacity

Supplied in this

unit  ( yes/no )

3GB iPod

3GB iPod

iPod mini

4G iPod & U2 iPod

4G iPod

iPod photo & Color U2 iPod 

iPod with color display

iPod photo 

iPod with color display

iPod nano

5G iPod & U2 iPod with video

5G iPod with video

iPod nano(2   generation)

nd

 

Summary of Contents for I-WXH 80














Reviews: