GB- 4
2. Insert a 3V lithium battery (CR2025 or equivalent) with the polarity (+)
matching the indication inside the battery compartment.
3. Close the battery compartment.
Note: The remote control battery normally lasts for about one year, although it
depends on how often and for what operations the remote control is used.
If the remote control fails to work even when it is operated near the unit,
replace the battery.
Precautions when using batteries
1.
CAUTION
: Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
2. Do not mix different types of batteries together (e.g. alkaline, rechargeable and
standard (carbon zinc)) or old batteries with fresh ones.
3. Exhausted batteries must be removed to prevent any battery leakage.
4. Dispose of batteries properly according to environmental regulations.
BASIC OPERATION
ON/ Standby mode
After connecting the power supply (refer to “
POWER SUPPLY
”), the unit is in
standby mode and the clock time is displayed. Press the
STANDBY
button to
turn on the unit and press it again to go to standby mode.
Setting the clock
1. In standby mode, press and hold down the
MEM/CLK SET
button and the
hour digits will flash.
2. Press the / buttons to set the hours.
3. Press the
MEM/CLK SET
button to confirm and the minute digits will flash.
4. Follow steps (2) and (3) to set the minutes.
Alarm operation
The unit allows you to wake up to the sound of the buzzer or to music
(Radio/iPod).
Set the alarm time
1. In standby mode, press and hold down the
ALARM SET 1/2
button and the
hour digits will flash.
2. Press the / buttons to set the hours.
3. Press the
ALARM SET 1/2
button to confirm and the minute digits will flash.
4. Follow steps (2) and (3) to set the minutes.
Setting the alarm mode
5. After setting the alarm time, the alarm mode option will flash. Select a source
using the
/ buttons: Buzzer “ ”, “Radio” or iPod “ ”.
Enable/ Disable the alarm function
6. Press the
ALARM SET 1/2
button to enable or disable the alarm function.
7. When the alarm function is on and the preset alarm time is reached, the alarm
will sound in the selected alarm mode.
8. To stop the alarm, press the
AL OFF
button. The alarm will sound again at the
same time the next day.
