GB- 6
DIMMER control
Slide the
DIMMER
switch to
HI
(high) or
LO
(low) to adjust the brightness of the
LCD display.
DISPLAY function
In radio mode, press the
DISPLAY
button to display the clock time. Press it again
to return to the radio information display.
RESET function
Press and hold down the
RESET
button for 5 seconds to reset the unit.
RADIO OPERATION
Listening to the radio
1. When the unit is switched on, press the
FUNCTION
button to select radio
mode.
2. Press the
STOP/BAND
button to select FM or AM.
3. Press and hold down the
or
button for about 1 second and the unit will
automatically search up / down for a radio station. For manual fine-tuning, you
can press these buttons repeatedly to adjust the frequency step by step.
FM Stereo
In FM mode, “ST” is displayed when the unit receives a station with a strong
signal and stereo sound.
Achieve optimum reception
In FM mode, extend and position the FM antenna to achieve optimum reception.
In AM mode, orientate the main unit to achieve optimum reception.
Preset radio stations
You can store up to 10 stations for FM and 10 stations for AM.
1. Use the / buttons to search a desired station. Press the
MEM/CLK SET
button and the station number will flash.
2. Press the
M
+ button to select a desired station number.
3. Press the
MEM/CLK SET
button again to confirm the setting.
4. Repeat steps (1) to (3) to store any other desired stations.
Listen to a preset station
When listening to the radio, press the
M
+ button to select a preset radio station.
PLAYING AN iPod AND CHARGING THE INTERNAL iPod BATTERY
Installing an adapter on the iPod docking
station
1. Select the iPod adapter that corresponds to your iPod
model from the table below.
