background image

Ensure a space of at least 5 cm around the apparatus to enable sufficient

ventilation.

GB

-

1

PRECAUTIONS

Follow the instructions below to ensure the product is used safely and correctly.

LOCATION

Do not use the unit in places which are extremely hot, cold, dusty, or humid.

Place the unit on a flat and level surface.

Do not restrict the airflow around the unit by placing it in a place with poor 

ventilation, covering it with a cloth, or placing it on a carpet.

Do not place the unit close to heat sources.

Use the unit only in moderate climates (not in tropical climates).

Do not expose the unit to rain or splash with water

Do not place objects filled with liquids such as vases on the unit.

SAFETY

When connecting and disconnecting the AC power adapter, take hold of the

plug and not the cord. Pulling the cord may damage it and may be dangerous.

The plug must be easily accessible.

When you are not going to use the unit for a long period of time, disconnect the

adapter from the AC mains outlet.

VOLTAGE

Before use, check that the rated voltage of your unit matches your local voltage.

CONDENSATION

 The unit may not work properly if it has condensation inside.

Unplug the unit for 1 to 2 hours before turning the power back on, or gradually 

heat the room up and dry the unit before use.

Do not cover the ventilation openings.

BATTERIES

Pay attention to the environmental aspects of battery disposal.

The lightning flash with

an arrowhead symbol 

within a triangle is a

warning sign alerting the

user to the presence of

dangerous voltage

inside the unit.

The exclamation mark 

within a triangle is a 

warning sign alerting the 

user to the presence of

important instructions

accompanying the

product.

ATTENTION: 

To reduce the risk of 

electric shock, do not remove the 
cover. There are no user serviceable 
parts inside the unit. Refer all 
servicing to qualified personnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Summary of Contents for i-CDX 22











Reviews: