PREREQUISITES FOR INTERNET RADIO
First of all, you will need a broadband Internet connection: a modem + router or a
wireless access point. You can choose between a wired
connection (Ethernet)
and a wireless connection (Wi-Fi).
CONNECTIONS
Note: In order to avoid any malfunctions, do not turn
on the unit before making the connections.
Wired connection (Ethernet)
Connect the unit to your broadband Internet
connection using an RJ45 Ethernet cable (not
supplied) via the router and broadband modem
(cable/DSL) as illustrated. Follow your router’s
instruction manual to ensure a correct Internet
connection.
ROUTER
MODEM
INTERNET
DATA PORT
RJ45 ETHERNET
CABLE (NOT
SUPPLIED)
If you do not have a router, connect the unit directly
to the modem and then switch the modem off and
back on to access the internet connection.
Note: Some modems have a built-in router, so
they are included in the same unit.
Wi-Fi connection
ROUTER
MODEM
INTERNET
DATA PORT
Use a router (not supplied) to connect the wireless
access point (Wi-Fi) to your broadband Internet
connection as illustrated. Should you have problems
with the Internet connection setup, contact your
networking device supplier and/ or Internet service
provider.
Note: The unit should work anywhere within a range
of at least 15 meters around the wireless
access point. However, the connection will
depend on your router’s performance and
environmental factors such as the number
and thickness of the walls, doors or windows.
Configurations
!
If your wireless network is protected by Wired Equivalent Privacy (WEP) or Wi-
Fi Protected Access (WPA) data encryption, you need to know the WEP or
WPA code in order to connect the unit to the network.
!
If your wireless network is configured to accept trusted units
only, you need to enter the unit’s MAC address into your
wireless access point. The unit’s MAC address can be
located by browsing through the menu: Main menu
!
Set-
up
!
Information
!
Network Status.
GB- 4
