GB-3
OPERATING INSTRUCTIONS
Connecting the power supply
Insert the AC power cord into the AC mains outlet with a 230V AC ~ 50Hz power source. The LED
display will flash.
Clock setting
1. Press and hold down the
TIME
and
FAST
buttons to set the clock quickly.
2. Press and hold down the
TIME
button and press the
SLOW
button repeatedly to set the clock
precisely, minute by minute.
Alarm operation
The unit allows you to wake up to the buzzer or radio.
Set the alarm time 1
1. Adjust the
ON/OFF/AUTO
switch to
AUTO
. The alarm
indicator(s) will light up.
2. Adjust the
ALARM 1/1+2/2
switch to
1
. The
AL1
LED
indicator will light up.
3. Press and hold down the
ALARM
and
FAST
buttons to set the alarm time 1 quickly.
4. Press and hold down the
ALARM
button and press the
SLOW
button repeatedly to set the alarm
time 1 precisely.
Set the alarm time 2
Follow the same steps in the section “
Set the alarm time 1
”, but
adjust the
ALARM 1/1+2/2
switch to the 2 position. The
AL2
LED
indicator will light up.
Wake to Buzzer
1. Turn the
VOLUME/OFF BUZZER
knob to “
BUZZ
” until a click sound is heard.
2. Adjust the
ON/OFF/AUTO
switch to
AUTO
. The alarm indicator(s) will light up.
3. Adjust the
ALARM 1/1+2/2
switch to select alarm 1, 2 or both (1+2). The corresponding alarm
indicators will light up on the LED display.
4. When the preset alarm time is reached, the buzzer will sound.
5. To stop the alarm, press the
ALARM/SLEEP OFF
button. The alarm will sound again the next
day at the same time.
Wake to Radio
Turn on and adjust the volume to desired level using the
VOLUME/OFF BUZZER
knob and follow steps
(2) to (5) in the section “
Wake to Buzzer
” for alarm operation.
Snooze function
When the alarm sounds, press the
SNOOZE
button to stop the alarm temporarily and it will sound again
after 7 minutes. To cancel the
SNOOZE
function, press the
ALARM/SLEEP OFF
button. The alarm will
sound again the next day at the same time.
CR38 SCOTT CX82 GB IM.indd 3
7/13/2009 5:34:59 PM
