PRECAUTIONS
Follow the advice below for safe and appropriate operations.
INSTALLATION
• Do not use the unit in places which are extremely hot, cold, dusty, or humid.
• Place the unit on a flat and even surface.
• Do not restrict the airflow of the unit by placing it in a place with poor airflow, by covering it with a
cloth, or by placing it on a carpet.
SAFETY
• When connecting and disconnecting the AC power cord from the AC mains outlet, pull the plug
and not the cord itself. Pulling the cord may damage it and may be dangerous.
• The mains plug must remain readily operable.
• When you are not going to use the unit for a long period of time, disconnect the AC power cord
from the AC mains outlet.
AC VOLTAGE
• Before use, check that the rated voltage of your unit matches your local voltage.
CONDENSATION
• When there is condensation inside the unit, the unit may not function normally.
• Let it stand for 1 to 2 hours before turning the power on, or gradually heat the room up and dry the
unit before use.
• Ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation.
• Ensure that the ventilation is not impeded by covering the ventilation openings with items such as
newspapers, tablecloths, curtains, etc.
• Do not place naked flame sources such as lighted candles on the apparatus.
• Pay attention to the environmental aspects of battery disposal.
• Use the apparatus only in moderate climates (not in tropical climates).
• Do not expose the apparatus to dripping or splashing.
• Do not place objects filled with liquids, such as vases, on the apparatus.
• Mains plug is used as the disconnect device. It shall remain readily operable and should not be
obstructed during intended use. To be completely disconnected the apparatus from supply mains,
the mains plug of the apparatus shall be disconnected from the mains socket outlet completely.
ATTENTION:
To reduce the risk of electric
shock, do not remove the cover. There are no
user serviceable parts inside the unit. Refer all
servicing to qualified personnel.
The exclamation mark within
a triangle is a warning sign
alerting the user to the pres-
ence of important instructions
accompanying the product.
The lightning flash with an
arrowhead symbol within
a triangle is a warning sign
alerting the user to the
presence of "dangerous
voltage" inside the unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
GB-2
In case of malfunction due to electrostatic discharge, the apparatus has to be reset by disconnecting it from
mains supply.
The marking plate is located on the bottom enclosure.
CR38 SCOTT CX82 GB IM.indd 2
7/13/2009 5:34:59 PM
