PROPAK i / f / fx
3
INTRODUCTION
COMPRESSED-AIR AIRLINE
SUPPLIES
Air for use with compressed-air airlines must
conform to EN 12021 : 1999 or AS/NZS1715 :
2009 and must have a dew-point sufficiently
low to prevent internal freezing when the
apparatus is used in temperatures below 4
o
C.
BREATHABLE AIR
Air used to supply or charge breathing air may
be natural or synthetic and must comply with
EN 12021 : 1999 or AS/NZS1715 : 2009.
PERSONNEL TRAINING
Personnel who use self-contained, compressed-
air breathing apparatus must be fully trained
in accordance with these instructions and
national regulations.
These instructions cannot replace an accredited
training course run by fully qualified instructors
in the proper and safe use of
Scott Safety
breathing apparatus.
SERVICING
Propak
must be serviced at scheduled intervals
by personnel who have completed a formal
training course and hold a current certificate
for the servicing and repair of
Scott Safety
breathing apparatus. Details of the servicing
schedule are contained in the
Scott Safety
Propak
Service Manual, copies of which can
only be obtained by registered holders of a
current certificate.
Parts must be repaired or replaced as and
when an issue arises.
Your distributor or
Training and Technical
Support Services
at
Scott Safety
will be
pleased to provide training course details and
quotes for service contracts.
SPARE PARTS AND
ACCESSORIES
Customer Services
provide an efficient,
friendly, customer contact point for ordering
new apparatus, spare parts and accessories.
The team can also provide general information
on
Scott Safety
products.
WARRANTY
The products manufactured at our factory in
Skelmersdale carry a warranty of 12 months
(unless stated otherwise) for parts, labour and
return to site. The warranty period runs from
the date of purchase by the end user.
These products are warranted to be free
from defects in materials and workmanship
at the time of delivery.
Scott Safety
will
be under no liability for any defect arising
from wilful damage, negligence, abnormal
working conditions, failure to follow the
original manufacturer’s instructions, misuse or
unauthorised alteration or repair.
Evidence of purchase date will need to be
provided for any claims arising during the
warranty period. All warranty claims must be
directed through
Customer Services
and in
accordance with our sales return procedure.
NOTIFIED BODIES
BSI (0086)
Kitemark Court,
Davy Ave,
Knowlhill,
Milton Keynes,
MK5 8PP.
England
