9
RECONNECT BLUETOOTH PAIRED DEVICES
1.
Ensure the APX radio is
powered on and the
Bluetooth indicator appears
in the top right hand corner.
3.
The APX radio will send a Bluetooth reconnection request to the RDI amp.
Once the RDI amp accepts the request, the APX radio will emit a signal tone
and briefly display or scroll the connected device on the screen.
The devices are now Bluetooth connected and ready for use.
2.
Power on the RDI Voice Amplifier by
pressing and holding the red power button.
The RDI Voice Amplifier will emit an audio
tone and the LED will switch from off to
green. Release the red power button.
This will place the RDI into Bluetooth
reconnection mode.
Main Display
Top Display
BT ON—No Connected Device
BT ON—Device Connected
Main Display
Top Display
Off
Green