17
A
E
E
A
Assembly (continued)
25
Attaching logs to ember bed
1. Install left log (F) into left hole of ember bed (E) by inserting front edge of the log base into front notches of ember
bed hole.
2. Then tilt the log back to insert the rear edge of the log base into rear notches of ember bed hole (press down
log firmly to lock into position).
□
Repeat the above process for the right log (G).
IMPORTANT: Carefully follow the 2 steps below for inserting each log.
26
Positioning ember bed
□
Set the ember bed (E) onto the heater (A) as shown.
□
Push ember bed forward against the front flange of heater.
□
Position the USB cable as shown below.
USB cable
G
E
E
1
2
E
