background image

13245 Barry Street, Holland, MI 49424

scottaerator.com [email protected]

800-WATER-45 (800-928-3745) (616) 392-8882

The Scott Aerator Awesome Warranty

All standard Scott Aerator products are unconditionally warranted for five years against motor defects in materials or workmanship, 

under normal operating conditions. All other product components are warranted for one year from date of purchase. Scott Aerator 

will repair or replace failed parts under warranty when the defective unit is returned to the factory, shipping prepaid, and factory 

inspection establishes that the part was defective. The unit must be returned to the factory prior to shipment of replacement parts. All 

parts replaced under this warranty will be returned with shipping prepaid. Scott Aerator will not be liable for consequential damage 

nor for any costs associated with removal or attempts to repair components in the field.

Made in America

Oscillator Programming Instructions

1.  Plug in - green power light will be ON
2.  Press Setup button - red power light will come ON
3.  Press and hold button with arrow pointing right, 

until desired end point is reached

4.   Release button - red light will flash fast.
5.  Press Setup button to lock position _ red light will 

stop flashing.

6.  Press and hold button with arrow poing left until 

desired end point is reached. Release button - red 
light will flash slow.

7.  Press Setup button twice - red light goes out, 

green power light comes ON. Settings retained 
even after powered off.

Lake Bottom Coverage

  1/3 HP  Up to 80 foot diameter 
  1/2 HP  Up to 100 foot diameter
  3/4 HP  Up to 120 foot diameter
  1 HP  Up to 150 foot diameter

 Surface Water Flow
 

1/3 HP  Up to 150 foot diameter 

  1/2 HP  Up to 200 foot diameter
  3/4 HP  Up to 300 foot diameter
  1 HP  Up to 400 foot diameter
 

Angle Adjustment

 

 

12"

Minimum

Depth

4"

From Pond/Lake Bottom

90°

45° 

12"

From

Surface

Set 90° angle 

 to control bottom debris

Set 45° upward angle 

 to control surface debris

1/2 HP

1/3 HP

3/4 HP

1 HP

Summary of Contents for Aquasweep









Reviews: