background image

We at Scott Aerator thank you for your purchase.

 It is our goal to ensure 

you are completely satisfied with your new AquaSweep and it continues 

to operate smoothly for many years to come. Please take a few moments 

to read through this document for proper assembly, installation and 

maintenance to maximize the operating life of the unit. 

Aquasweep Dock Mounting 

(Page 3) 

Aquasweep with Freestanding Pole

 (Page 6)

 

 

This Kit Includes

1 - Aquasweep  8" Housing/Yoke

1 - Stainless Steel Debris Shield

1 - Stainless-Steel Pole

1 - Dock Mounting Plate

1 - Packet of Lubricating Compound

2 - Thumb Screws

3 - Small Self Tapping Screws

4 - Large Phillips Head Screws

Tools Needed

One 3/8" Wrench or Socket Screwdriver

One Phillips Style Screw Driver

Two 1/2" Wrenches (Or Pliers)

Drill and 1/4" drill bit

Aquasweep with Oscillator 

(Dock Mount Only - Page 4)

 

 

This Kit Includes

1 - Aquasweep  8" Housing/Yoke

1 - Stainless Steel Debris Shield

1 - Oscillator Assembly

1 - Dock Mounting Plate

1 - Packet of Lubricating Compound

2 - Thumb Screws

3 - Small Self Tapping Screws

4 - Large Phillips Head Screws

1 - 3/16" Hex Wrench

Tools Needed

One 3/8" Wrench or Socket Screwdriver

One Phillips Style Screw Driver

Two 1/2" Wrenches (Or Pliers)

Drill and 1/4" drill bit

Aquasweep Floating 

(Page 5)

 

 

This Kit Includes

1 - Aquasweep 8" Housing/Bracket

1 - Stainless Steel Debris Shield

1 - Float Platform

2 - 3" Eyebolts/Washers/Locks Nuts

3 - Small Self Tapping Screws

2 - 3/8" x 50' braided nylon rope

Tools Needed

One 3/8” Wrench or Socket Screwdriver

Two 1/2” Wrenches (Or Pliers)

This Kit Includes

1 - Aquasweep 8" Housing/Yoke

1 - Stainless Steel Debris Shield

1 - Stainless Steel Pole

1 - 4 Prong Stabilizer

1 - Dock Post Mounting Bracket 

1 - Stainless Steel Mounting Pole

1 - 24" Driving Sleeve

3 - Small Self Tapping Screws

Tools Needed

One 3/8" Wrench Or Socket Screwdriver

Two 1/2" Wrenches (Or Pliers)

 

 

!

Only connect to a GFCI Protected Circuit

Always disconnect the power when swimmers are present

Do NOT use an extension cord to supply power to the motor 

In This Guide

1

Summary of Contents for Aquasweep









Reviews: