UF0915, 1415, 2020 and UN0815, 1215, 1520 User Manual
October 2019
Page 14
Front Panel Removed. On and Off
Buttons and Indicator Lights
Use and Operational Notes
To use, simply lift the door by its bottom edge and
slide it up and into the top of the machine. Use the
scoop to remove ice and close the door.
The machine will make the most ice if it has plenty
of room to breathe. This is an air cooled product and
it must be able to take in room air and discharge air
heated by the ice making process.
Blockage of vents or exposure to excessive heat will
reduce the ice making and storage capacity.
The storage bin is insulated but not refrigerated, so
ice will melt during use. That is normal and assures
that fresh ice is available in the bin.
The fan will make some noise during operation,
however rattles and other vibrations are not normal
and should be attended to.
If the machine is in a space colder than the minimums
listed it can become damaged.
Caution: The cabinet is not designed to support
anything placed on it. Do NOT step or stand on it.
On and Off
The On and Off buttons are located behind the
louvered front panel. Remove that panel to access
those buttons.
To Shut Off: Push and release the Off button and the
unit will begin a shut down. Push and hold the Off
button for an immediate shut off.
Status Indicator Light
Glows green when either making ice or when the bin
is full of ice (optical sensors blocked by ice).
Clean Indicator Light
Serves as a reminder that it is time to have the unit
cleaned. Normally off. This light glows after 6 months
of power up time between cleanings. It will go out
after the unit has been cleaned using the process
in this manual and / or the one on the ice machine’s
cleaning label.
Water Indicator Light
Normally off. It glows when there is power to the unit
but no water sensed in the reservoir. A lack of water
will trigger a unit shut down. The unit will automatically
restart after water has been restored.
Power Status Water De-scale
Sani�ze
On
Off
