NME1254R & FME1504R
January 2000
Page 21
SENSOR MAINTENANCE:
1. The bin control uses devices that sense light,
therefore they must be kept clean enough so that
they can “see”. At least twice a year, remove the
bin control sensors from the base of the ice chute,
and wipe the inside clean, as illustrated.
2. The ice machine senses water level by a probe
located in the water reservoir. At least twice a
year, the probe should be removed from the
reservoir, and the tip wiped clean of mineral
build-up.
3. Clean the remote condenser. Use a vacuum
cleaner or coil cleaner if needed.
Do NOT use a wire brush.
4. Check and tighten all bolts and screws.
ICE DISCHARGE
CHUTE
SLIDE IN AND
OUT
ICE LEVEL
SENSORS
Clean the Probe's Tip with ice
machine cleaner and a clean,
soft cloth.
