Model Number Description
Example:
•
CU2026MA-6A
•
C= cuber
•
U=under the counter type
•
20= nominal ice capacity in 10s of pounds
•
26= nominal width of cabinet
•
M=medium or full dice cube. S=small or half
dice cube.
•
A=Condenser type. A=air cooled. W=water
cooled
•
-6=230 volt 50 Hz
•
A=Series revision code. A=first series
Note: In some areas of this manual model numbers
may include only the first six characters of the
model number, meaning that the cube size,
condenser type and voltage differences are not
critical to the information listed there.
Product Description & Electrical Requirements
Scotsman ice systems are designed and
manufactured with the highest regard for safety
and performance.
Scotsman assumes no liability of responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the
use of any part and/or other components not
specifically approved by Scotsman.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and design are subject to change
without notice.
2007
Page 3
CU1526, CU2026, CU3030
Installation Manual
Dimensions
w x d x h**
Model
Electrical
volts/Hz/phase
Condenser
Maximum Fuse Size*
676 mm x 699 mm x 838 mm
CU1526MA-6
230/50/1
Air
15
CU1526MW-6
230/50/1
Water
15
676 mm x 699 mm x 838 mm
CU2026MA-6
230/50/1
Air
15
CU2026MW-6
230/50/1
Water
15
778 mm x 762 mm x 838 mm
CU3030MA-6
230/50/1
Air
15
CU3030MW-6
230/50/1
Water
15
Table notes: Small cube models have the same electrical characteristics as Medium. Series revision
code omitted.
* Or HACR type circuit breakers.
** Screws thru base add 7 mm to height if not using legs. If using legs add between 150 mm to 173 mm.
