background image

 

 

MANUFACTURER’S LIMITED 3 YEAR PARTS and LABOR WARRANTY 

Cube Ice Machines, including C0322, C0330, C0522, C0530, C0630, C0722, C0830, C1030, C1448, C1848, C2148, 
C2648, EH222, EH330, EH430, CU1526, CU2026, CU3030, ECC0800, ECC1410, ECC1800 

Scotsman warrants to the original purchaser-user, that any of the above commercial cube ice machines of its manufacture 
bearing the name Scotsman, will be free from defects in material and/or workmanship. Scotsman further warrants that 
these machines will perform adequately under normal use if properly installed and maintained in accordance with the 
Manual furnished with the product.  

Starting Time:

 This product warranty begins with the date of original installation if the installation is reported to Scotsman 

on the warranty registration form furnished with the product

 

or registered on line at Scotsman’s website. If no installation 

date is reported, the length of the warranty will be 39 months from the date of shipment from the factory. Irrespective of 
the actual installation date, the product warranty will expire seventy-two (72) months from date of shipment from factory. 

What is Covered

: Components are covered for parts and labor for 

3 years

 after installation, Additionally: 

 

The evaporator plate is covered for parts and labor for 5 years after installation. 

 

The motor compressor and condenser are covered for parts for 5 years after installation. 

This warranty is applicable only in the United States, Canada, the Caribbean, Mexico, Central America and South 
America. Excluded areas include: Africa, Asia, Australia, and Europe. 

Scotsman’s Obligation

: Limited strictly to replacing, or to repairing, upon return to the factory, transportation charges 

prepaid, any part or parts that shall be found to be defective in material and/or workmanship during the warranty period. 
All decisions regarding defects in material or workmanship or accident, alteration, misuse, or improper maintenance or 
installation shall be made by Scotsman’s Service Department and shall be binding upon the parties. Labor reimbursement 
is provided according to the procedures below. 

Requirements:

 Warranty service must be performed by a Scotsman Distributor or an authorized service agent approved 

by the Factory Service Department, or the local Scotsman Distributor. 

User Responsibility

: The product must be installed, cleaned and maintained as described in the Manual furnished with 

the product. 

Procedures:

 Reimbursement for labor charges covered by this labor warranty will be made directly to the Scotsman 

Distributor and will be calculated by using the local established hourly service rate (not to exceed the labor rate in effect 
and published by the local Scotsman Distributor) and the hour allowance published in the Scotsman Labor Rate Book. 

All claims for labor reimbursements must be made through the local Scotsman Distributor; approved replacement parts 
must be used. The defective part and service invoice must be returned to the local Scotsman Distributor within fifteen (15) 
days from the date of service to be eligible for labor reimbursement. Incidents of failure that do not require the 
replacement of a part must be explained in sufficient detail on the service invoice to identify the failure. All claims must 
include the ice machine Model Number, Serial Number, original date of installation and customer identification.  

Exclusions:

 Labor reimbursements include straight time labor charges only, and shall not include charges for travel time, 

mileage, or other premium charges. Any ice machine whose initial installation date is more than five years from its 
production date is excluded from this warranty. 

This warranty does not include parts or labor coverage for a component failure or other damage resulting from: 

 

Electrical power or water supply failure to the ice machine for any reason. 

 

Operating the product beyond the specifications set in the product’s manual. 

 

Failure to clean and maintain as set forth in the product’s manual. 

 

Installations that are not in accordance with the instructions in the product’s manual. 

This warranty is in lieu of all other warranties or guarantees of any kind, express or implied. ANY IMPLIED 
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXCLUDED AND 
DISCLAIMED. 

IN NO EVENT SHALL SCOTSMAN BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND 
OR NATURE, OR FOR ANY DAMAGES RESULTING IN WHOLE OR IN PART FROM MISUSE OR INADEQUATE 
MAINTENANCE OF THE PRODUCT OR ANY PART THEREOF. 

No part or assembly which has been subject to accident, alteration or misuse, or which is not installed or serviced in 
accordance with the Manual furnished with the product, or which is from a machine on which the serial number has been 
altered or removed, shall be covered by this warranty. 

SCOTSMAN

®

 is a registered trademark of Scotsman Group Inc., 775 Corporate Woods Parkway, Vernon Hills, Il 60061  

17-3088-01 Rev F 

Summary of Contents for C0830MA-32





































Reviews: