Scotchman Porta-Fab 45, Manual, Page: 13 / 80

Page 12
4.4 ELECTRICAL REQUIREMENTS
A 10 foot (3 meter) cord is provided with this machine. The plug you install on the cord must have a
minimum rating of 30 amps. We do not recommend using extension cords with this machine. If there is
a case where an extension cord must be used, it must be of adequate gauge and rating to support the
amp draw of this motor. Failure to adequately size an extension cord for this machine may result in
damage to the machine. Any extension cord used with this machine must be at least 10 gauge and have
ends rated for 30 amps. Check the motor data tag for full load current requirements.
4.5 MACHINE START-UP
Before starting this machine, take time to thoroughly review the safety dvd and the operator’s
manual. We strongly urge you to follow the OSHA directive CFR-1910.147 (effective 09-01-90)
regarding lock-out, tag-out procedures.
Before powering the machine, be sure that all packing materials and tools have been removed from the
machine and that all work stations are clear.
CAUTION: TO PREVENT DAMAGE TO THE MOTOR AND DANGER TO THE
OPERATOR, ALL ELECTRICAL CONNECTIONS SHOULD BE MADE BY A
LICENSED ELECTRICIAN.
MOTOR VOLTAGE
1PH 220/230V
RPM: 1425/1725
POWER RATING: 2HP
FULL LOAD CURRENT
FRAME: 56C
HZ: 60/50
1PH 110/115V 22.5/19 AMPS
11.5/9.5 Amps