MAKING A VOICE CALL
The F1 to F4 or F5 buttons are assigned as Direct-Call buttons. Pressing such a button will place a call to the
pre-programmed identity.
With the radio in its idle state use the scroll left / right buttons to select the required phone book entry
then press to call.
The Users ID number can be entered directly as a dial string using the Keypad. e.g. 451 will call radio unit
No 451. When a call is placed, the ID and a call timer is displayed on the screen.
• Both radios will “ring” and will be connected and will display the audio enabled icon.
• A conversation can now take place by each operator, in turn, pressing their Microphone PTT buttons and speaking.
• When the call is finished, either operator can end the call by pressing the Red Handset button.
NOTE:
If the called radio cannot be contacted (radio off or out of range) within a short period of time about 10-30 seconds
a Radio Busy or Unavailable message is displayed and call-fail tones are emitted.
RECEIVING A VOICE CALL
• When a call is received the radio will ring and display the audio enabled icon.
• A conversation can now take place by each operator, in turn, pressing their Microphone PTT buttons and speaking.
• When the call is finished, either operator can end the call by pressing the Red Handset button.
If a call is not answered details of the MISSED call are entered in the Stored Calls Screen and is shown on the
screen. The SRM9030plus responds in the same manner as above for Priority and Emergency calls. Emergency Calls
show Emergency on the display.
RECEIVING A GROUP VOICE CALL
All radios that are members of the Group automatically connect to the group call. While in a Group Call, all operators can
PTT, in turn, and talk to each other. Only the Originator can Clear the call..
Button/ Control
Button
Function
On/Off/Volume
Push knob for 2 seconds to switch the radio On or Off. Rotate
to set volume to the desired level.
Rx/Tx/Power LED
Green LED when unit on, Red LED when transmitting.
Green Handset
Used to place a call to the displayed identity.
Red Handset
Used to end a call, backspace /clear dialstring entries and
return to the Main Menu Screen.
Keypad
Used to dial numbers and enter/edit text
Scroll Up/Down
Scroll between Menu Screens
Scroll Left/Right
Scroll through lists (within a Menu Screen) or scroll through
the phone book in the idle state.
Function Button
F1
Function Button
F2
Function Button
F3
Function Button
F4
Function Button
F5
Alarm
Function Button F6
On Mic.
This button is programmable for a special operation.
SRM9030plus Mobile Radio
QUICK USER GUIDE
Supervisor
Garioch
Group
(Cancel Divert)
(Divert to Handheld)
www.scot-tel-gould.co.uk
Tel: 01224 471335
