4
WIRE COLOR CODES
White
= Left Front Positive (LF+)
Gray
= Right Front Positive (RF+)
White/Black
= Left Front Negative (LF-)
Gray/Black
= Right Front Negative (RF-)
Green
= Left Rear Positive (LR+)
Violet
= Right Rear Positive (RR+)
Green/Black
= Left Rear Negative (LR-)
Violet/Black
= Right Rear Negative (RR-)
Black
= Chassis Ground
Orange
= Illumination
Yellow
= +12V Constant Power
Blue/White
= +12 Remote Output
Red
= +12V Accessory/R.A.P output
(Amp, radio on signal)
Blue
= +12V Power Antenna
NAVIGATION CONNECTIONS:
Violet/White
= VSS Vehicle speed pulse signal
Red/White
= Reverse light trigger (+12V when in reverse gear)
Yellow/Black
= Parking brake trigger (-12V when park brake ON)
Orange/White
= Auto illumination (Data controlled lighting output on some GM LAN
applications with AUTO headlights enabeled)
NOTE:
The RED Accessory output wire from the
S3-1
interface is rated at 10A Max
output for most aftermarket head unit demands. We do NOT recommended
connecting addi12V switched accessories to this output source as
it may cause damage to the
S3-1
module itself. If 10A output is not
sufficient, then a relay is needed (Relay not included).
NOTE:
Illumination & auto illumination outputs are designed for head unit
connections only.
S3-1 SPEAKER / AUDIO CONNECTIONS
RCA LOW LEVEL
SPEAKER WIRE
(Cut-off RCAs)
• GM Bose
(Excludes Prem. Bose)
•
Ford Premium Sound
• Toyota JBL/Lexus
• Chrysle
r
•
Ford
(Non-Premium)
**
• GM Bose
(Non-Bose)
**ATTN:
All Ford Harness RCA cutting must be performed on vehicle side of the
circuit board.