SCORPION Tribunus II 14-300A ESC SBEC User Manual Download Page 8

Page 8

AIRPLANE

This is the page where you set up your Airplane Settings.

*Only adjusts Airplane settings when the Airplane Mode is activated in the previous menu- Device Mode*

AIRPLANE MENU

DRAG BRAKE

 Adjusts the amount of brake enabled. If 0% is selected, the propeller will 

free-wheel in forward flight with the throttle at the 0% position. If 100% is selected, 

the propeller will not move in forward flight with the throttle at the 0% position. 

THROTTLE ACCELERATION: 

Adjusts the overall time that it takes for the motor to spool 

up from 0% to 100%. For example, a larger aircraft such as a 50CC plane will require a 

value of about 500ms. A smaller aircraft with a 1 to 1.5 meter wingspan will require a 

smaller value of about 350ms or similar.

PWM MODE: 

Adjusts the way in which the ESC drives the motor. 

 

Regular:

 Operates as a standard ESC would without regenerative braking

 

Complimentary: 

Actively slows down the motor when throttle is reduced  

 

 

(best for Multirotors or aircraft that require regenerative braking)

12.3 Airplane mode 

Summary of Contents for Tribunus II 14-300A ESC SBEC



















Reviews: