SCORPION Exo-GT3000, Tech Manual, Page: 9 / 10

7
1 2
3
4
8
OPERATION OF FLIP UP CHIN BAR
!WARNING! BE SURE THAT CHIN BAR IS CLOSED SECURELY!
DO NOT OPERATE MOTORCYCLE WITH CHIN BAR IN OPEN POSITION!
PULL LEVER DOWN AND AWAY FROM FACE
Cleaning Your Helmet System
RATCHETING SYSTEM
To remove your faceshield, place the helmet in front of you with the eye
port facing away. Ratchet the faceshield up to the fully open position.
Using both hands, push up the Y shape release latchet upward and the
shield is able to release out of locking mechanism. Then, with both of your
thumbs pushing squarely on the center of the Ellip-Tec™, gently pull or
“peel” the faceshield away from the helmet.
IMPORTANT NOTE:
Be sure to latch up the
“Y” release latchet
while removing the
faceshield!
Continued on pg. 9 >>
FIRMLY AND SECURELY FASTEN YOUR CHINSTRAP.
Check your chinstrap for tightness occasionally as vibration or wind may
loosen it.
Do not simply pull your helmet down onto your head like a hat. Your
ScorpionExo
®
helmet should be worn as follows: Using both hands grab
the helmet’s bottom rim while holding the chin straps with your thumbs.
Then “roll” the helmet onto your head starting at the forehead. Continue
rolling the helmet on towards the back of the head until it comes to rest
with your head fully in contact with the inner lining and cheek pads.
HOW TO USE CHINSTRAP
FACESHIELD REPLACEMENT
SECURING AND WEARING
YOUR HELMET
DO NOT ATTEMPT TO ADJUST WHILE RIDING
®