5
6
DO NOT ATTEMPT TO RELEASE WHILE RIDING
REMOVING THE CROWN LINER
After removing the cheek pads, reach into the helmet and pull
out the Crown-liner shown below. The front part of the liner is
snapped to the helmet liner frame. Gently detach it from the
forehead channel and pull away from interior of helmet.
USING THE AIRFIT® LINER SYSTEM
FEATURE FOR CUSTOMIZED FIT
There is an internal air bladder in the cheek pad and neck roll of the
helmet, it inflates by repeatedly depressing the pump
located in the back of the neck roll.
To deflate the air bladder, hold down the button to the side
of the pump. The air will slowly release in a few seconds.
!WARNING!
Though the inflation / deflation system of this helmet is
designed to be used when you are actively wearing
your EXO-GT3000.
Do not modify, puncture, or damage the air bladders in
any way. If the air bladder, or any other part of the
inflation / deflation system becomes damaged or faulty,
please consult with your dealer for parts warranty
coverage details.
REMOVAL OF SPEEDVIEW® SUNVISOR
FOR CLEANING OR REPLACEMENT
NOTE: FIRST, OPEN OUTER SHIELD TO THE HIGHEST POSITION. THEN LOWER THE
SUNVISOR TO LOWEEST POSSIBLE POSITION. (See page 4)
Firmly hold the sunvisor with your hand and gently pull one side out
away from the helmet to release. Repeat to release the opposite side.
Reverse process for installation.
5
6
DO NOT ATTEMPT TO RELEASE WHILE RIDING
REMOVING THE CROWN LINER
After removing the cheek pads, reach into the helmet and pull
out the Crown-liner shown below. The front part of the liner is
snapped to the helmet liner frame. Gently detach it from the
forehead channel and pull away from interior of helmet.
USING THE AIRFIT® LINER SYSTEM
FEATURE FOR CUSTOMIZED FIT
There is an internal air bladder in the cheek pad and neck roll of the
helmet, it inflates by repeatedly depressing the pump
located in the back of the neck roll.
To deflate the air bladder, hold down the button to the side
of the pump. The air will slowly release in a few seconds.
!WARNING!
Though the inflation / deflation system of this helmet is
designed to be used when you are actively wearing
your EXO-GT3000.
Do not modify, puncture, or damage the air bladders in
any way. If the air bladder, or any other part of the
inflation / deflation system becomes damaged or faulty,
please consult with your dealer for parts warranty
coverage details.
REMOVAL OF SPEEDVIEW® SUNVISOR
FOR CLEANING OR REPLACEMENT
NOTE: FIRST, OPEN OUTER SHIELD TO THE HIGHEST POSITION. THEN LOWER THE
SUNVISOR TO LOWEEST POSSIBLE POSITION. (See page 4)
Firmly hold the sunvisor with your hand and gently pull one side out
away from the helmet to release. Repeat to release the opposite side.
Reverse process for installation.
Summary of Contents for Exo-GT3000
Page 1: ......