Battery Level Indicator
System Armed
Silent Paging Only Arming
Perimeter Sensor Disabled
Shock Trigger
Perimeter Trigger
Alarm Clock
Ignition Trigger
Clock
Back up Power Activated
Signal Indicator
Alert Type Aud/Vibr
System Disarmed
Tilt Trigger
Button #1
Button #2
Button #3
Button # 4
Cycle Low Battery Indicator
Operating Instructions
Arm
1.
Press button #1, siren chirps 3 times and the turn signal lights flash 1 time.
2.
The Transceiver echoes 3 chirps and the LCD displays
and
icons.
Disarm
1.
Press button #2, siren chirps 1 time and lights flash 1 time.
2.
The Transceiver echoes 1 chirp and the LCD displays icon.
Arming Without Perimeter Sensor (optional)
1.
Press button #3, siren chirps 4 times and turn signal lights flash 1 time.
2.
The Transceiver echoes 4 chirps and the LCD displays
,
and
icons.
3.
The system is armed but the Perimeter Sensor is disabled.
Arming Without Siren / Paging Only
1.
Press buttons #1 and #3 at the same time, siren chirps 5 times and the turn signal
lights flash 1 time.
2.
The Transceiver echoes 5 chirps and the LCD displays
,
and
icons.
3.
The system is armed but the siren and turn signal lights are disabled for a silent
paging only alert.
Arming Without Siren or Perimeter Sensor (optional) / Paging Only
1.
Press buttons #2 and #3 at the same time, siren chirps 6 times and the turn signal
lights flash 1 time.
2.
The Transceiver echoes 6 chirps and the LCD displays
, ,
and
icons.
3.
The system is armed but the siren, turn signal lights and perimeter sensor are
disabled.
Panic/ Stop Trigger
1. When system is armed press button #3 for Panic feature.
2. Pressing button #3 during an alarm trigger stops the alarm cycle but keeps
the system armed.
Alarm Triggers
When the system is triggered, the siren will sound and the turn signal lights will flash. The
Transceiver’s LCD will display the following massages:
1. If bike is bumped, the LCD displays
icon.
2. If the bike is tilted, the LCD displays icon.
3. If the ignition switch is turned on or tampered with, the LCD displays
Icon.
5
4. If the perimeter sensor triggers a full alarm cycle, the LCD displays icon.
(Note: The turn signal lights will not flash for a perimeter sensor trigger).
5. With the optional back up system installed, the LCD displays icon if the main
harness or battery power supply is disconnected. The MCM will still continue to
operate and transmit from its internal power source.
6. The Transceiver will continue to flash the triggered icon until any button is pressed.
Note: The Transceiver will sound a unique tone to correspond with the triggered sensor
Remote Transceiver Icons and Massage Displays
6