Scorpio Miss bipe S2065, Assembly & User'S Manual

Page: 15 / 16

Bag [B1]
No. Qty. Description
[B1-2] 2 Pushrod tubes
[B1-1] 2 Wire rods with “Z” bends
[B1-4] 2 Threaded adapter
[B1-5] 4 Nut
[B1-3] 4 Clevis
[B1-6] 1 Elevator joiner
[B1-7] 2 Aileron pushrod
[B1-8] 2 Torque rod horn
[B1-9] 2 Control horn
[B1-10] 1 Right torque rod
[B1-11] 1 Left torque rod
Bag [B2]
No. Qty. Description
[B2-1] 2 Wheel
[B2-2] 4 Wheel lock washer
[B2-3] 2 Upper wing joining dowel
[B2-4] 1 Lower wing joining dowel
[B2-5] 1 Tailskid
[B2-6] 1 Hatch retaining screw
[B2-7] 2 Upper wing dowels
[B2-8] 2 Lower wing dowels
[B2-9] 8 Rubber bands
Die-cut sheet [DC1]
No. Qty. Description
[DC1-1] 2 Dihedral Brace
Die-cut sheet [DC2]
No. Qty. Description
[DC2-1] 2 Radio plate mounts
[DC2-2] 2 Main wing strut doubler
[DC2-3] 1 Deck mounting plate
[DC2-4] 1 Radio plate
[DC2-5] 2 Longeron supports
[DC2-6] 1 Former
Die-cut sheet [DC3]
No. Qty. Description
[DC3-1] 4 Main wing strut doubler
Die-cut sheet [DC4]
No. Qty. Description
[DC4-1] 2 Upper wing strut
[DC4-2] 1 Undercarriage doubler
[DC4-3] 1 Mounting plate
[DC4-4] 1 Rear former
[DC4-5] 1 Wing servo tray side
[DC4-6] 1 Wing servo tray plate
[DC4-7] 1 Undercarriage securing plate
[DC4-8] 1 Undercart doubler
[DC4-9] 2 Hatch/deck former
Die-cut sheet [DC5]
No. Qty. Description
[DC5-1] 2 Motor cradle side
[DC5-1] 1 Motor cradle rear former
Die-cut sheet [DC6]
No. Qty. Description
[DC6-1] 1 Motor front former doubler
[DC6-1] 1 Motor cradle front former
S2065 Miss Bipe