background image

PRX4 & PRX4SERL Four Zone Receiver Decoder 

Ref: RX4USER

 

Page 3 of 8

 

Issue 1

 

 
Installation

 

 

Installation must only be undertaken by an Approved contractor, who shall ensure that 
all work is carried out in compliance with National Wiring Regulations. For mains 
powered equipment, a readily accessible isolating fuse or switched socket must be 
located within 1 metre of the equipment. 
 

No User Serviceable Parts

 

 
Alteration or modification to any part of this equipment, without the prior written consent 
of the manufacturer, will invalidate all Approvals and Warranties attaching to the 
equipment. Further liability for the operation of the equipment, under the applicable law, 
will pass to the user, who will absolve the manufacturer of any further responsibility for 
it’s correct operation and use. 
 

Liability 

 
Scope does not accept liability for any damage or injury, howsoever caused as the 
result of misuse of this equipment. It is the responsibility of the user to ensure that the 
equipment is operated in the manner for which it was intended and that it is the correct 
item of equipment for the required task. 
 

Warranty 

 
This product is warranted as free from defects of workmanship and materials for a 
period of one year from the original purchase date. During this time, if there is a defect 
or malfunction of this product, Scope will, with proof of purchase, repair or replace at it’s 
discretion any defective parts, free of charge. This does not include where the 
adjustments, parts and repair are necessary due to circumstances beyond the control of 
Scope, including but not limited to fire or other casualty, accident, neglect, abuse, 
abnormal use or battery leakage damage. 
 

WARNING  ! No User Serviceable Parts  

Celui-ci ne contient aucune piece pouvant etre reparee par l’utilisateur 

Alteration or modification to any part of this equipment, without the prior written consent 
of the manufacturer, will invalidate all manufacturer approvals and warranties.  No 
adjustments can be undertaken except by qualified and licensed persons as authorised 
by Scope.  

 

This product complies with the essential requirements of the R&TTE Directive 1999/5/EC. 
Copies of the Declaration of Conformity covering this product can be obtained from Scope at: 
Quantum House, Steamer Quay, Totnes TQ9 5AL United Kingdom. 
 

Do not discard.  At end of life this equipment must be sent to an authorised waste treatment centre. 

Contact Scope at the above address for further details. 

 

 

© Scope Communications UK Ltd, 2005 All Rights Reserved 

Summary of Contents for PRX4









Reviews: