14
7. MAINTENANCE AND CLEANING
Your product requires routine inspection and maintenance.
This chapter describes maintenance and operation steps.
Before performing the following operations, make sure that the power is
off and that the charging cable is unplugged.
7.1. INSPECTING AND CLEANING YOUR DEVICE
•
Regularly check the steering column, head tube, handles and tire wear.
•
We recommend that you check the tightening of the screws of the front
wheel, rear wheel and bonnet screws regularly and tighten if necessary.
These adjustments may be needed because of vibrations caused by
using the device.
•
Regularly check the inflation of the rear wheel and inflate with a bicycle
pump or equivalent when required.
Here are some instructions and precautions for cleaning the device:
• Unplug all the device’s charging cables before cleaning it.
•
Do not immerse it in water.
•
Do not use a high-pressure cleaner, water jet or any other appliance or
washing method that would allow water to seep into the device.
•
Clean the device with a slightly damp sponge or soft cloth, avoiding
connectors and buttons and taking care not to allow the water to enter
the receptacles, circuits or the interior of the product.
•
Do not use water or liquid cleaners directly on the device to clean it.
• Do not use abrasives or solvents that could damage the paint on your
device.
•
Be careful when cleaning and wiping plastic parts.
• Do not use abrasive products or solvents to clean metal or plastic parts.