Assembly
– Cont:
6. Open outward nylon fastener at both side of PP
deck and lift PP deck as shown, it works as storage
room.(FIG.6)
(FIG.6)
7. Attach the seat post to the seat post
receiver.(FIG.7)
8. Insert the lock into post holder on the top of
PP deck.make sure to fasten the lock.(FIG.8)
9. Attach silver lock clamp to the top of the seat post
as shown.(FIG.9)
10.Pull the upper seat post to the desired position and
tighten the lock clamp securely.(FIG.10)
11. Attach the seat to the upper seat post and
tightening the seat bolts as shown.(FIG.11)
12.This scooter is 4-stroke, DO NOT use engine oil to fill
(FIG.7)
and mix for fuel tank. Engine oil for machine oil tank only(FIG.12)
Attention: Change the engine oil every 8-10 hours riding, otherwise warranty would be avoided!
(FIG.9)
(FIG.8)
(FIG.10) (FIG.11)
OIL RULER
HIGHEST OIL LIMIT
UPPER LIMIT
UPPER LIMIT
LOWER LIMIT
(FIG.12)
Summary of Contents for 49cc 4 Stroke Gas Scooter
Page 14: ......
Page 18: ...Idling speed screw FIG 23 ...