If the address starts with:
Change that number to:
0
8
1
9
2
A
3
B
4
C
5
D
6
E
7
F
If using a Smart Box (with app), RF Touch or
an RF Pilot you must go through an offset
procedure.
You must enter the address of the receiver
into the Smart Box (via the app) RF Pilot or
RF Touch but you must alter the address
according to the table below:
Once you have entered the address
into the Smart Box (via the app),
RF Touch or RF Pilot and while the
repeater is still in learning mode
(switched on but with no light
showing) use the remote control
(Smart Box via app, RF Touch or RF
Pilot) to switch the receiver on or off.
You will notice that the light on the
repeater blinks green if the unit has
been paired.
Move to step 6.
Once you have successfully paired
the devices, press the “STATUS/
PROG” button to switch to resume
normal operation. The green indicator
will be constantly illuminated.
You can link up to 20 devices per
repeater. When you have reached
the maximum number of devices the
green indicator on the repeater will
flash, then the red indicator will flash
and then constantly green.
5a
5b
6
For all bilateral control devices:
Examples:
An address of:
001C76
would change to:
801C76
An address of:
703E54
would change to:
F03E54
3c
Programming / Learning Mode
3b
Programming / Learning Mode
For pairing with basic switch transmitters as
shown below.
For sensor devices as shown below including
the PIR and window/door contacts
Still while no indicator lights are illuminated on the repeater;
use the control that is paired with the receivers you wish to
assign to the repeater. Press a button/switch on the control
to turn the receiver on. The repeater status light should flash
green once to indicate the pairing has been made.
Move to step 6
Still while no indicator lights are illuminated
on the repeater; insert the battery/batteries
into the product. The repeater status light
should flash green to indicate the pairing
has been made.
Otherwise move to step 6
4a
4b
Scolmore Park, Landsberg, Lichfield Road Industrial Estate, Tamworth, Staffordshire B79 7XB
Tel: +44 (0) 1827 63454 Fax: +44 (0) 1827 63362
www.scolmore.com
V1.1
If pairing these devices to a Smart Box, RF Touch or RF Pilot see step 5a below.
