Scolmore Click Smart Box Installation & Control Manual Download Page 7

Page: 7 / 42

www.click-smart.com

Preparation - Quick Installation Guide & Check List

To assist in the setting up of the smart box and applications, we recommend the

following process is followed.

Installation Sheet (printed copy supplied)

Document list of rooms, receivers, receiver type and receiver address

page 6

Range Test

Carry out range test, (a repeater RFRP-20/B may be required)

page 2

Smart Box Setup

Wire Smart Box to router using Ethernet cable

page 5

Ensure both router and Smart Box are powered

Ensure the Smart device’s Wi-Fi is connected to the same router as

the Smart Box

page 5

Application Guide - Setup

Pair the Smart device app to the Smart Box

page 9

Assign name to Smart Box

page 9

Confirm pairing the Smart Box with grey circular icon turning blue

page 9

Add room/location names and assign icon

page 10

Add elements/receivers and assign its icon and room/location

page 11

Create scenes (if required - can create scenes later if preferred)

page 13

This manual is available to access from within the applications via the

‘Help’

links

displayed within the ‘settings’ menus.

Once the smart box has been setup and operational, when pairing additional smart devices

to the same smart box all the programmed data will automatically be uploaded.

Quick Installation Guide &

Check List

Summary of Contents for Click Smart Box











































Search results

Summary of Contents for Click Smart Box

Reviews:

Related manuals for Click Smart Box

Brands by name

Popular brands

Scolmore Click Smart Box, Installation & Control Manual

Search results

Summary of Contents for Click Smart Box

Reviews:

Related manuals for Click Smart Box

Brands by name

Popular brands