11
Application Guide - Adding & Assigning ‘Elements’
With
‘Elements’
home screen shown, the elements (receivers and related appliance)
for the complete installation can be added and also assigned to its room (location).
Select
‘ADD ELEMENTS’
to enter the menu and enable the list of elements/receiver
on the installation sheet to be entered.
1. Select
‘Name of element’
on the menu and the on screen keyboard will appear.
Enter the element/receiver appliance name, e.g. Table Lamp Lounge.
Fig. E1
2. Select the smart box IP address or name from the drop down list which appears.
3. Select
‘Enter receiver address’
and type in the address from the installation sheet.
The letters can be entered in lower case.
Note:
Ensure the address is correct as in the event an error is made the receiver will
not operate.
Adding the receiver ‘Ele-
ments’
