SCM SC 10, Manual

Page: 15 / 34

14
Checking the impeller and the suction plug
If the air volume decreases:
a - Check that the impeller or the suction plug are not clogged and remove possible
clogging materials.
b - Replace the impeller and/or the suction plug and/or the bushing seal of the impeller.
In case they would be damaged, consult S.C.M. Tecnologie.
Check the air input
Check the air input pipe is not clogged or damaged, which both can cause a
motor overload.
Check that the throttle valve (when installed) is in good conditions.
Check that the silencer (when installed) is dust-free, if not clean it from dust.
All the described checks must be periodically carried out to extend the useful life of
the aerator.
6.4 INACTIVITY:
Consult the “Storage and handling chapter”
7. TO TAKE OUT OF USE AND DISMOUNT:
8. WARRANTY
The general conditions for sale of all products manufactured by S.C.M. Tecnologie. are
also valid for the submerged aerator in question.
In particular, remember that one of the essential conditions for recognition of the warranty
is that you strictly follow all the individual instructions given in the enclosed documentation.
Another fundamental condition to ensure regular operation of the aerator is that you must
have the best hydraulic and electrotechnical provisions,.
Malfunction caused by wear and tear and/or corrosion is not covered by the warranty.
To prevent the warranty from becoming void, the product must first be examined by our
technicians or by technicians from our Authorized After-sales Centres.
Failure to strictly follow the instructions in the documentation supplied with the aerator
shall void shall relieve the manufacturer from all responsibilities in merit.
When dismantling the aerator, the technician must proceed with the
relative phases in strictly following the local rules and regulations
governing such activity.