SCM Cuno 2 Aqua, Manual

Page: 21 / 138

EN
OEM Manual – CUBO
2
AQUA
UMT/WG T BT Rev3.0 – 08/10/2021 Pag. 19-EN
8.3 Regulation set point
Select “Compressor” and press “Enter”
Select “Regulation” and press “Enter
If there are no serial communication between the
CDU and the remote evaporators, compressor will
be managed with a fixed setpoint.
Suction set point request.
P+I regulation mode.
In case of remote evaporators enabled, regulation
type switch automatically from fixed point to
floating setpoint
Min. and max. setpoint variation admitted.

The above values are the factory settings. They can require some adjustments
according to the system response .

The factory settings doesn’t include the evaporator management.

With the standard factory setting the unit will work based on a fixed suction set-point.