User Manual
Scion Tech
SC38.MX88
8.0.5 Audio Settings
The matrix can extract audio from either the HDMI inputs or the HDBaseT outputs, analogue L/R audio and
digital SPDIF. The audio source can be selected from the front panel buttons.
Audio Output Ports
Audio Sources
Input Breakout
Output Breakout
ARC
L+R OUT 1
IN 1 Breakout
OUT 1 Breakout
L+R OUT 2
IN 2 Breakout
OUT 2 Breakout
L+R OUT 3
IN 3 Breakout
OUT 3 Breakout
L+R OUT 4
IN 4 Breakout
OUT 4 Breakout
SPDIF OUT 1
IN 1 Breakout
OUT 1 Breakout
OUT 1 ARC
SPDIF OUT 2
IN 2 Breakout
OUT 2 Breakout
OUT 2 ARC
SPDIF OUT 3
IN 3 Breakout
OUT 3 Breakout
OUT 3 ARC
SPDIF OUT 4
IN 4 Breakout
OUT 4 Breakout
OUT 4 ARC
Example: Select the HDMI input 2 audio source for the analogue L+R output 2.
1. Press “Menu” then “Down” until you see
Audio Setting.
Press “Menu” to enter.
2. Press “down” until you locate
L+R OUT 2,
press “Menu” to confirm.
3. Press “down” to select
IN2 Breakout
.
4. Press “Menu” to confirm.
L+R Output Volume Control
1. Press “Menu” and “Down” to locate the
Audio Setting
. Press “Menu” to enter.
2. Press “Down” to locate
L+R OUT 2 Vol
. Press “Menu” to confirm.
3. Press “Up” and “Down” to set the required volume.
4. Press “Menu” to confirm.
8.0.6 Preset Setting
The matrix supports nine presets but only 1~4 can be set or recalled using the front panel buttons. RS232 or
TCP/IP GUI should be used to set and manage all presets.
Save the current routing t a preset.
1. Press “Preset” and select
Hold 3s t Store
.
2. Press “Input 2” to select
Preset 2
.
3. Press “Menu” to confirm.
Recall a saved preset
1. Press “Preset” and select
Preset Recall
2. Press “Input 2” to select
Preset 2
.
3. Press “Menu” to confirm.
8.0.7 Current IP Address
1. Press “Menu” and “Down” to locate
IP Address
2. Press “Menu” to reveal the current system IP Address.
Page 13
Tel: +44 (0) 1635 862484
www.scion-tech.co.uk
