PRO-6000B Series Operating Manual
Issue 1.1V – 17/06/2008
- 11 -
Scion Tech Ltd
- 11 -
- 11 -
Cut, Copy and Paste your Configurations
The Cut Copy and Paste options from the Edit menu may be used to modify the
configuration.
To copy a viewer’s settings to another viewer, click on either the Bar button or Force
button to highlight it. If the desired mode was not previously selected (indicated by a grey
button) you will need to click the button twice. Click on the Room name of the viewer you
wish to copy. From the Edit menu, click Copy. Click on the Room name of the viewer you
wish to copy the settings to, then, from the Edit menu, click Paste.
The Bar or Force button will revert to its un-highlighted state.
To copy the same settings to another viewer, click the "Force" or "Bar" button to highlight
it then click another room name and click Paste
To copy the settings to all viewers, select Paste To All from the Edit menu instead of
Paste..
Selecting Cut instead of Copy will cause the selected viewer to be denied access to all
channels (Bar mode) or disable forcing to a specified channel (Force mode) , but allowing
his previous settings to be pasted to other viewers.
To copy the settings for a channel to another channel, (available in Bar mode only), click
on the Bar button to highlight it then click on the channel name you wish to copy. From
the Edit menu, click Copy. Click on the channel name you wish to copy the settings to,
then, from the Edit menu, click Paste.
To copy the same settings to another channel, click the Bar button to highlight it then
click another channel name and click Paste
To copy the settings to all channels, select Paste To All from the Edit menu instead of
Paste.
Selecting Cut instead of Copy will cause all viewers to be denied access to the selected
channel but allowing its previous settings to be pasted to other channels.
