PRO-6000B Series Operating Manual
Issue 1.1V – 17/06/2008
- 10 -
Scion Tech Ltd
- 10 -
- 10 -
Clearing forced channels
1.
Click the “Force” icon. If the “Bar” icon was previously selected, the “Force”
icon will change colour to orange. Click the “Force” icon again, the icon will
now change to yellow.
2.
Click the “Clear” icon under the room you wish to clear. The “selection” icon
will change to blue.
Changing channel names
Default channel names are displayed on the users screen when selecting channels. These
names can be changed to suite your installation.
1.
From the main menu click “Edit” and select “Source Names”.
2.
The source names dialogue box will appear. This displays the current channel
names.
3.
From the list click once to highlight the name you wish to change.
4.
Click again and wait for the curser to flash. Do not try to double click.
5.
Type the new name and click on another name to continue.
6.
When you have finished re-naming, click “OK”
Changing room names
Room names are useful for identifying screen locations and users. These names can be
changed to suite you installation.
1.
From the main menu click “Edit” and select “Source Names”.
2.
The source names dialogue box will appear. This displays the current channel
names.
3.
From the list click once to highlight the name you wish to change.
4.
Click again and wait for the curser to flash. Do not try to double click.
5.
Type the new name and click on another name to continue.
6.
When you have finished re-naming, click “OK”
Saving your configuration settings
To save the current settings for the channel and location names, the channel each viewer is
switched to and has access to, and the time at which all channels will be barred to all
viewers, go to the File menu and click Save. The configuration file will be saved under its
current filename.
If no configuration file is currently open, the Save As dialog box will be opened.
