background image

1

BlueSpin

 (Hotplate) Magnetic Stirrer

Preface 

Welcome to the “

BlueSpin

 (Hotplate) Magnetic Stirrer”. 

Users should read this Manual carefully, follow the 
instructions and procedures, and be aware of all the 
cautions when using this instrument.   

Service 

When help needed, you can always contact the Service 
Department of manufacturer for technical support in the 
following ways: 

SCILOGEX, LLC 

500 Four Rod Road 
Suite 122 
Berlin, CT 06037 USA 
Tel: 1-860-828-5289 
Fax: 1-860-828-5389 
E-mail: 

[email protected]

 

Http://www.scilogex.com 

Please provide the customer care representative with the 
following information

 

• Serial number

on the rear panel

Certification

• Description of problem (i.e., hardware or software)
• Methods and procedures adopted to resolve the problems
• Your contact information

Warranty 

This instrument is warranted to be free from defects in 
materials and workmanship under normal use and service, 
for a period of 24 months from the date of invoice. The 
warranty is extended only to the original purchaser. It shall 
not apply to any product or parts which have been damaged 
on account of improper installation, improper connections, 
misuse, accident or abnormal conditions of operation. 
For claims under the warranty please contact your local 
supplier. You may also send the instrument directly to 
manufacturer, enclosing the invoice copy and by giving 
reasons for the claim.

Summary of Contents for MS-H280


















Reviews: