9
All keys will be blocked when system comes into counterdown interface.
Please restart it if you need to config parameter or select procedure. It will
goes into running interface in 3 seconds. Then press start/stop key over 2
seconds, you will see parameter configuration interface. At last, press
start/stop key quickly to run it when you finished setting parameter.
APF & RTF are enabled, while ORF is disabled at default. It will run ORF if ORF
and APF are both enabled. Quickly press start/stop key, procedure will save the
configuration information and exit current menu. Press start/stop over 1second,
it will exit current menu without saving configuration information.
4.7.2. Automatic recovery after power failure
（
ORF
）
:
Enable ORF, it will get back to the procedure run
before power failure, once when power on again.
Disable ORF, it requires to select procedure when
power on again.
4.7.3. Automatic Running
（
APF
）
: Enable APF,
automatic running last procedure when power on.
Disable APF, Select procedure when power on.
4.7 Other Functions
Power on, then immediately press P key and Timer key at the same time, it will enters
into Function Configuration Menu.
4.7.1.
Automatically keep constant temperature
after finishing operation
（
RTF
）：
Enable
RTF
, keep constant temperature after
finishing operation.
Disable
RTF
, start cooling after finishing operation.
APF DISABLE
APF ENABLE
ORF DISABLE
ORF ENABLE
RTF ENABLE
RTF DISABLE
