17
8.
Push-fit AgCI electrode into the silicon tube (ID 0.063”, OD 0.125”) leaving
0.5mm of AgCI body exposed above tube.
9.
Feed assembly through top of brain bath
10.
Pull silicon tube until AgCI electrode is level with brain bath surface
11.
Connect to reference electrode cable connector
Maintenance Tooling
Tool Description
Purpose
Hexagon Ball Driver 2mm
Heat Exchanger Lid Retainer Screws
Tube Cutter
Silicon Tubes
Steel Rule
Measuring Tubing Length's
Soldering Station
Ref. Electrode Off-line Assembly
Solder - 5 core
Ref. Electrode Off-line Assembly
Plastic Spatula
Loading Pinch Valve Tubing
Consumables
Item
Purpose
Inlet Port
PMK210-1 Nylon inlet 1/16” to 1/16”
Outlet Port
PMS230-1 Nylon Outlet 1/8” to 1/8”
Inlet to heat exchanger tube
3/32”OD 1/32”ID platinum cured silicone
Heat Exchanger Tube
1.22mm OD 0.76ID Portex Polythene Tubing
Heat Exchanger to bath tube
3/32”OD 1/32”ID platinum cured silicone
Summary of Contents for SliceMate
Page 1: ...1 SliceMate Manual...