16
Using the DHCT
Setting Up the DHCT
After you connect the DHCT to any additional
electronic devices in your system, follow these
steps to use your DHCT:
1. Verify that the DHCT is connected to the 75 ohm
coaxial cable coming from the wall.
2. Plug the DHCT and other devices into your AC
mains receptacle.
Important:
Do not press the Power key (
)
on the DHCT.
3. Turn on the power to your TV and VCR, and
tune your TV and VCR to the input channel
assigned by your cable service provider.
4. Press the Power key on the DHCT.
5. Programme your remote control to operate your
TV and VCR. (Refer to your remote control
user’s guide for instructions.)
6. Use your remote control keys to operate the
DHCT. (Refer to your remote control user’s
guide for navigating instructions.)
Using the Basic Functions of the DHCT
Control the volume, select channels, select on-
screen functions, and change settings using the
keys on the front panel of the DHCT or the keys
on the remote control.
Using the Remote Control and On-Screen Guide
Read the user’s guides that your cable service
provider included with the DHCT installation
package. These guides provide operating
instructions for using your remote control and the
on-screen guide, if applicable.
