manualshive.com logo in svg

ScienTECH Vector S310, Setup And Operating Procedures, Page: 37 / 43

Share
Download
ScienTECH Vector S310 Setup And Operating Procedures Download Page 37

 

32 

F

ACTORY 

R

ECALIBRATION

 

Scientech recommends that a complete calibration be performed annually to verify system accuracy.  Please 
contact our Product Service Department at (800)525-0522 or (303)444-1361 or Fax (303)444-9229 to arrange 
for a NIST traceable, factory calibration. 
 

L

IMITED 

W

ARRANTY 

 

All Scientech Laser Power and Energy Measurement Systems are warranted against defects in materials and 
workmanship for two (2) years from date of delivery. During the warranty period, Scientech will repair, or at 
its option replace at no charge, components that prove to be defective. The equipment must be returned, 
shipping prepaid, to Scientech's product service facility. This limited warranty does not apply if the 
equipment is damaged by accident or misuse or as a result of service or modification by other than a 
Scientech service facility. The foregoing warranty is in lieu of all other warranties expressed or implied 
including but not limited to any implied warranty of merchantability, fitness, or adequacy for any special 
incidental or consequential damages whether in contract, tort, or otherwise. 
 

R

ETURNED 

G

OODS 

P

ROCEDURE

 

Should it become necessary to return any item to Scientech for any reason, please contact our Product Service 
Department at (800)525-0522 or (303)444-1361 or Fax (303)444-9229. When you call, please be ready to 
provide model number, serial number, and a description of the problem. Frequently we can provide self-help 
information which will eliminate the need for returning the unit(s). 
 
If equipment return is required, please pack the items in the original box and packing material. As an 
alternate, place the equipment in a snug-fitting box, then pack that box in a larger box with at least four inches 
of packing material. Scientech does not assume responsibility for underpacked items. 
 
Please include the name and phone number of the person we should contact regarding repair questions. 
 
Normally, products are repaired and shipped within 5 working days after their arrival at the product service 
facility. This is an average time and could vary depending on the workload. 
 
Shipping Address: 
 
Scientech, Inc. 
Product Service Department 
5649 Arapahoe Ave. 
Boulder, Colorado 80303 
U.S.A. 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for Vector S310












































Reviews:

No comments