ATTACHING THE WAGON
If you have purchased additional wagons repeat the steps
above to join the components. Remember to use connec-
tor E2 in Phase 1 when connecting several wagons
Insert the dowels into the holes of one of the
wagon sides. Cap the ends of the dowels with
the wheels. They should fit tightly - if they are
too tight, use the provided sandpaper to sand
down the dowels. If too loose apply wood glue.
CONGRATULATIONS
YOU DID IT!
Share your completed creation with us on
Instagram or Facebook!:
@scienceSeeds
Additional kits are available at
www.scienceseeds.com/shop
PHASE 1
PHASE 2
A
B
B
C
D
E2
E1
F
G
G
H
I
J
When assembling your wagon, the etchings on
the panels should face outwards.
Use E2 when attaching
this wagon to another
wagon, otherwise use E1.
To attach the wagon to another wagon or a
locomotive, position the rounded connec-
tors as shown and thread the pin through
them.
