29
Programming Telephone Numbers
The CEO-24 can be programmed with up to 3 different telephone numbers (up to 16 digits
each). Each of these numbers will be called by the thermostat twice, in case there is no
answer or the password is not entered. This process will repeat itself every 2 minutes, until
the call is answered.
Follow the steps below to program the telephone numbers:
Press the
Select
button again – 'n1' will be displayed.
•
This is the first telephone number that the thermostat will call.
•
Press
the
'+'
button – 'the number ‘5' will be displayed.
•
Using
the
'+'
or
‘-‘
buttons select the first digit of the telephone number.
•
Press
the
Select
button again to switch to the second digit.
•
Using
the
'+'
or
‘-‘
buttons select the second digit of the telephone number.
•
Repeat this sequence until the full number is entered.
•
Press
the
Select
button twice to switch to the second telephone number ‘n2’.
•
Repeat the steps above to the second and third telephone numbers.
Important: When changing one of the programmed numbers simply override the old
number digits using the "+" and "-" buttons. If the new number has fewer digits than the
old one enter the new shorter number and than press and hold
Select
button to erase
the remaining digits of the old number.
Summary of Contents for CEO-24-HC22 Series
Page 31: ...31 ...
