Figure 3.5
Figure 3.6
8
ATTACH THE FRONT FENDER
❶ Place the front fender on the frame and over the front
wheel. Figure 3.5
❷ Align the mounting holes with the holes in the frame.
Note: There are six posts with mounting holes on the
underside of the bumper. DO NOT use the bottom set
of holes.
❸ Insert the screws through the holes in the frame and tighten
the front fender to the frame. Be sure the front wheel does
not rub against the front fender.
WARNING!
Unstable items (such as: hot fluids, tall bottles, metal
containers) placed in the parent tray may tip over and
seriously injure the passenger. Always remove items that
may tip over before using the stroller.
❶ Align the slots in the parent tray with the large pegs on the
handle. Figure 3.6
❷ Lower the tray onto the pegs and snap into place.
ATTACH THE PARENT TRAY
3
1
2
2
1
1
