Insert forks through head tube of frame. Be sure that the fork
is completely inserted through frame to allow approximately
22mm (7/8”) of fork steer tube to show through top of head
tube, as pictured below.
Push stem clamp onto fork steer tube. Ensure there is no
space between the head tube and stem clamp. Insert handle-
bar into fork steer. Be sure to insert far enough to cover the
‘minimum insertion’ mark on the handlebar. Align handlebar
and front wheel and tighten stem clamp with 13mm (1/2”)
wrench.
Step 3
Approx. 22mm (7/8”)
Note: Ensure minimum
insertion mark (pictured)
is not visible.
Step 3 continued
Minimum insertion mark
8
7
