6
ATTACH THE FRONT WHEEL
❶
Loosen the locking nut by hand.
Figure 3.6
❷
Align wheel axle with front wheel forks and insert wheel.
Figure
3.7
Finger tighten the locking nut located on one side of the axle.
❸
Lock axle in place by pressing the quick release lever toward the
wheel
Figure 3.8
, until it is secured against the frame.
NOTE: It may be difficult to press the quick release lever against
the frame. If so, release the lever, loosen locking nut one or two
turns and try again.
TIRE PRESSURE NOTE: inflate tire pressure to 25-psi. Use a
manual bike pump to inflate tires. NEVER use an air compressor
to fill tires with air (like those used at gas stations).
Remove Front Wheel -
Pull quick release lever away from wheel.
Figure 3.7
Figure 3.6
Figure 3.8
Quick
Release
Lever
Quick
Release
Lever
Locking
Nut
2
1
3
Fork
Fork
