manualshive.com logo in svg

Schwinn AD7 AirDyne, Service Manual

Share
Download
Schwinn AD7 AirDyne Service Manual Download Page 56

56

NOTICE:

   It is necessary to remove the Shrouds for this procedure. Refer to the “Replace the Shrouds” procedure.  

It is necessary to adjust the Drive Belt tension at the end of this procedure. Refer to the “Belt Tension Adjustment” procedure

Note:

  Your machine may not match the image. For reference only. 

1.

  Unplug the AC Adapter from the wall outlet and machine. 

2.

  Record the position of the Tension Adjustment Nuts (A) on the 

Threaded Tensioners (B) on both sides of the machine. Count the threads 

or mark a piece of paper.

3.

  Carefully remove the Shrouds. Refer to the “Replace the Shrouds” 

procedure in this manual.

4.

  Using a #2 Phillips Screwdriver, loosen and remove the screws 

that attach the lower Fan Cage. Carefully remove the lower Fan Cage 

sections. Set them safely aside for reassembly. 

5.

  Using a 19mm open end wrench, loosen the Fan spindle lock nuts 

(C) on the Threaded Tensioner (B) on both sides of the machine. 

6.

  Using a 10mm open end wrench, loosen the Adjustment Nuts (A) on 

both sides of the machine. 

7.

  Slowly turn the Drive Pulley (D) forward and carefully ease the Drive 

Belt (E) off the Drive Pulley to the outside from the bottom of the pulley. 

 

   

Be sure to keep fingers clear of all pinch hazards as 

you turn the Drive Pulley.

A

B

C

D

E

Crank arm not shown

Summary of Contents for AD7 AirDyne
































































Reviews:

No comments

Brands by name

Popular brands

Load more brands