36
Note:
Your machine may not match the image. For reference only.
1.
Unplug the AC Adapter from the wall outlet and machine.
2.
Loosen and remove the Pedals. Set them safely aside for
reassembly.
Note:
The Left Pedal is reverse-threaded.
Orientation is based
from a seated position on the bike. The Left Pedal has an “L”,
the Right Pedal an “R”.
3.
Using an 8mm hex key, remove the Cap Screw from the Crank Arm
assembly (B).
NOTICE:
Hold the Crank Arm assembly so that it does not fall.
4.
Remove the Crank Arm assembly (B) from the Crank Assembly shaft
(C). Set it safely aside.
5.
Installation is the reverse procedure.
Using an 8mm hex key, completely tighten the new Cap Screws (A) on the
replacement Crank Arms, or torque to 60 N.m.
The Left Crank Arm has an “L”, the Right Crank Arm an “R.
Orientation is based from a seated position on the bike.
Make sure the Crank Arms are secure before you exercise.
To reinstall the Pedals, carefully align the threads and hand tighten to
prevent cross-threading. Then tighten fully with pedal wrench.
Note:
The Left Pedal is reverse-threaded.
Be sure to attach
Pedals on the correct side of the Bike. Orientation is based
from a seated position on the bike. The Left Pedal has an “L”,
the Right Pedal an “R”.
6. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.
(L)
(R)
A
C
B
(60 N.m)
